Roller shutters are one of the most important elements of your business for so many reasons, such as athletics appeal, privacy, weather protection, noise reduction, insulation, etc. The occurrence of issues associated with your roller shutters can raise panic. However, before you pick up the phone to immediately upgrade your rolling shutters with stunning shopfitters, it is ideal for you to know the common roller shutter problems and the fixes they may require.
Power Source & Connections
The first thing you should always look for before anything else is the power source and the electrical connections. Improper working of the power source or loose connections can obstruct its smooth working.
Fix: Make sure the power source is turned on and working fine. Use battery-back if there is a problem with the power source for temporary use until the issue is fixed. Contact an electrician to rectify the loose connections.
Emergency Release Chain
There is a release chain for both manual and electric roller shutters for emergencies. Check if the roller shutter is responding when you pull the emergency release chain.
Fix: If the roller shutter door is not responsive after pulling the emergency release chain, then there is an issue with your roller shutter, for which you can contact a professional roller shutter repair service.
Maintenance helps in enhancing the lifestyle of shutters; therefore, make sure you handle your roller shutter door with care.
Dirt or Debris within the Tracks
Repairing shutters is important to ensure the smooth operation of your business, with protection guaranteed. However, the functioning of roller shutters can be interrupted by dirt or debris accumulated within tracks. Check if your roller shutter is running slowly, making irregular movements or not running at all.
Fix: The first essential step is to clear the tracks with a stiff brush. Apply grease as a lubricant to smoothen the movement of the roller shutter.
Overheating
Frequent use of roller shutter can heat up the motor, which may damage it. Analyse if you have been using a roller shutter too frequently in a short space of time.
Fix: Let the motor of the roller shutter cool down. Let it rest for at least 10 minutes before using it again. If the problem continues to remain, then heating of the motor may not be the cause of improper working of the shutter roller, and you may be required to contact professional shutter repair services.
Proximity Sensors
Proximity sensors have control over the opening and closing of roller shutters. Check if your proximity sensors are covered with dust or dirt or are damaged, causing functionality problems.
Fix: Turn down the power and ensure that your proximity sensors are clean, not damaged and in the right place. If you are unable to determine the issue, you can always contact professional shutter repair services to identify and fix the problems seamlessly.
Dents and Damage
Dents and damage to your roller shutter can possibly interfere with its operation.
Fix: Dents and damage can be caused by rough use, for which you may need to contact professional services. Fix the issues for the smooth operation of the roller shutters and enhance the appearance of your shop with stunning shopfitters.
Clash of the Code
The roller shutter system is automated by a code that may conflict with your neighbour’s roller shutters.
Fix: Contacting professional roller shutter repair services is the only solution for this problem. However, it is essential that you check all the other possible reasons for malfunctioning before contacting the experts.
